vat真空阀门

产品分类

热门关键词

联系我们

昆山熙日机械设备有限公司

联系人: 张小姐

手机:(0)13913143077

联系人:李先生

手机:(0)15895662155

邮箱:kssunnyjx@126.com

QQ:1191890920

微信:kssunnyjx

网址:www.leybold-inficon.com

www.xiri-vacuum.com

办公地址:江苏省昆山市长江南路77号

维修地址:江苏省昆山市花桥镇星光工业园2A


Pirani gauge Transducer TRP-10/TRP-10SP

您的当前位置: 首 页 >> 产品中心 >> 大亚DIAVAC

Pirani gauge Transducer TRP-10/TRP-10SP

  • 所属分类:大亚DIAVAC

  • 点击次数:
  • 发布日期:2018/03/10
  • 在线询价
详细介绍

High-Accuracy Capacitance diaphragm gauge | Pirani gauge | Cold cathode Ionization gauge | Hot cathode Ionization vacuum gauge | 
Combination vacuum gauge

Pirani gauge 

Pirani gauge Transducer 
[TRP-10/TRP-10SP]

Features and application
• Low-cost design by unified sensor and control circuit
 Wide range measurement covering from atmospheric pressure to 5x10 Pa
 High-accuracy with significant improvement in temperature correction due to adoption of digital circuit
 Light-weight and compact due to digital circuit and unique filament       structure
 Output of 0 to10 VDC in proportion to pressure can be converted to pressure by means of log-linear equation
 Best suitable for automation with standard installation of RS-485 digital communication
 Transducer TRP-10: driven by 12 to 30 VDC power, power-indicator TR-  1DA and TR-1DB: driven by 100 to 240 VAC power
 Best suitable for low vacuum measurement of various vacuum systems
 Best suitable for pressure monitoring of various processes
 Optional TRP-10SP: equipped with 2 set-points and best suitable for pressure detection at valve on/off etc. as a vacuum switch
 Best suitable for automation of various vacuum systems.
Product specification

Sensor part

Type, modelPirani Type transducer: TRP-10/TRP-10SPTemperature rangeat operation: 5 to 60ºC at storage: -10 to 65ºCMaterial used in coverABS-resinProtector structurecorresponding to IP40Cable length100 m or less (use twisted pair shield wire)Vacuum connectionNW16 (standard)ф15 (option)Exterior dimension drawing[PDF] [DXF]Massca. 120 g/130 g (TRP-10SP)


•Circuit part

Measuring systemconstant temperature systemMeasuring range1.0 X 105 to 5.0 X 10-2PaPressure resolving powerMantissa (2-digits including 1 digit under decimal point) + exponential with signAnalog outputDC 0 to 10V output voltage =LOG(P)+3 load resistance: 10kΩ or morevoltage resolving power: 2.4mVAttachmentatmospheric pressure (ATM), high vacuum (HV),volume adjustable from outsideDigital communicationRS-485, 2-line system, semi-dual, number of channels: 0 to 15ch(9600bps, 8databits, even parity, 1stopbit)Set point*2-points independent,NPN-open collector system,negative logic, output rating:DC 30V 50mAPower ratingDC24V(12 to 30V) 35mA/55mA(TRP-10SP)
* Set-point is TRP-10SP.


Power indicator for transducer [TR-1DA]
Feature and application
• Power indicator for Pirani gauge transducer:TRP-10
 No pressure conversion error occurs on indicator due to digital communication of pressure signal from transducer
 Maximum 3 units of TRP-10 can be connected for real-time measurement. Monitoring from outside possible due to installment of 3-channeled analog output and RS-485
 Six set-point output can be assigned freely to any of 3 transducers: for example, to each one of 3 transducers can be assigned 2 points respectively, or to 1 transducer 6 points.
 Power voltage is flexible between 100 to 240VAC.
tr-1da.jpg

Connection example}



Product specification

Responding transducerTRP-10, connection number 3 points
Connector: D-SUB 9P
Measuring rangedepends on connected transducer
Pressure displayMantissa (2-digits including 1 digit under decimal point) + sign + 
exponential 1 digit, unit: Pa
Transducer communicationRS-485 communication: ch=0, ch2=1, ch3=2-channel number fixed
Communication cycle: 200 msec/3ch
Analog outputPressure signal: 3ch 0 to 10 VDC (at load resistance: 10KΩ or more)
Output/input from outsideOutput:set-point x6, transducer status X 3, system status NPN open collector output (photo-coupler insulated)rating: 30VDC/50mA or lessInput:Outside mode selection, sensor on/off X 3, indicated CH-switching X 2 bitPower input (photo-coupler insulated)
Up-level link communicationCommunication:RS-485 4-line system, all dualcommunication specification:9600/4800/2400/1200bps, 8databits, even/odd/no parity, 1/2stopbitCommunication address:0 to 97 (function setup system) 3ch dedicated
Rating powerAC100 to 240V±10%, 50/60Hz, 30VA
Exterior dimension96(W) X 96(H) X 166.4(D)[mm] (excluding protrusion)
Massca. 820g

Power indicator for transducer [TR-1DB]

Features and application
 Power indicator for Pirani gauge transducer:TRP-10
 No pressure conversion error occurs on indicator due to digital communication of pressure signal from transducer
 Two set-points are equipped.
 Power voltage is flexible between 100 to 240VAC.
 Easy key-operation with compact body (H48 X W98 X D131 mm)
 Best suitable as pressure monitor of various processes

Product specification

Responding transducerTRP-10 connection number: 1 point
Connector: D-SUB 9P
Measuring range1.0 X 105 to 5.0 X 10-2Pa
Pressure displayMantissa (2-digits including 1 digit under decimal point) + sign + 
exponential 1 digit, unit: Pa
Transducer communicationRS-485 communication: zero-fixed 
channel number, communication cycle: 100 msec.
SettingFront key-input program system
Set function: SP 1 to 2
Output/input from outsideOutput:set-point 1.2, status NPN open collector output (photo-coupler insulated)rating: 30VDC/50mA or lessInput:Outside mode selection, sensor on/off Voltage input (photo-coupler insulated)Rating: DC24V ±10%, 4.1mA Typ,Connector:high density D-SUB 15P
Rating powerAC100 to 240V ±10%, 50/60Hz
Service temperature range5 to 60ºC  (storage temperature: -10 to 65ºC)
Protection structure corresponding toIP 40(interior steel plate closed type)
Exterior dimension drawing[PDF]  [DXF]
Installing methodpanel-burying method (with metal fitting)
dimension of installing hole: 2(W) X 45(H)[mm] (+0.5, -0mm)
Massca. 530g

Pirani gauge unit
PSG-1

Features and application
 Sensor + control circuit unified
 Driven by power voltage of 12 to 24DCV
 Recording output installed
 In the case of filament breaking, for example, replacement of sensor part only is feasible to cope with, since sensor and control circuit are separable.
 Optionally, 2-points setting of set-point output is feasible to use one as pressure switch.

Product specification

Measuring methodConstant temperature system
Measuring range1.0 X 105 to 5.0 X 10-1Pa
Pressure signal output

System4-20mA
Load resistance400Ω or less
Wire-breaking signal output

Systemopen collector
Output logicnormal/close
RatingDC 30V/50mA
Option outputset-point: 2 points independent

Systemopen collector
Output logicnormal/open
RatingDC 30V/50mA
Power voltageDC 12 to 15, 24V
Current consumption150mA

Sensor part

Service ambient temperature0 to 40ºC
Material for coverAl
ColorMunsell value N-6.5
Exterior dimension63ф X 120L
Vacuum connection15ф or NW16 (optional)
Exterior dimension drawing
[PDF] [DXF]
Connector shape9-pins D-SUB connector
Cable length100 m or less
Massca. 200g


PT-3DA 

Features and application
 The key operation is simple.
The set point is equipped with six.
 With the recorder output.
 It is equipped with RS485/RS422 serial communication(option) and it controls it with the host computer to 16 1 lines.
It is possible to do the data management and it supports to make FA.
 It is possible to connect a measurement child in a maximum of three.�iOption�j
The simultaneous display is possible in three measures with multi- display mode feature of it.
 Various for the vacuum equipment.

Product specification

Measuring range1.0 X 105 to 1.0 X 10-1Pa
Sampling cycle100msec
Exterior outputSet-point6 points
Auxiliary functionhysterics value, output theory
RatingAC110V 0.5A load resistance
StatusAC110V 0.5A load resistance
REC OUTPUTfull range DC 0 to 5V/0 to 10V
Service temperature0 to 40ºC
Power voltageAC100~240V 50/60Hz 30VA
Gauge headPSG-1
MassMain body1700g
Gauge head200g
Exterior dimension drawing[PDF] [DXF]
Panel cut dimension
Standard attachmentPSG-1(ф15)power cord:3mMeasuring cord:2m
Option2 to 3 ch simultaneous measurement
BCD output
4 to 20 mA analog output
RS 422A/RS-485
Printer output
PSG-1 (NW 16)
Measuring cord: 5, 10, 20 m

PT-9P

Features and application
 Easy readout due to adoption of large-sized analog meter of 2-ranges       automatic switching
 Low-price
 Equipped with recorder output
 For pressure monitoring
 For research and development

Product specification

Measuring range1.0 X 105 to 1.3 X 10-1Pa
Range2-range automatic switching
Measurementconstant temperature measuring circuit
REC OUT output
1R+2R DC 0 to 10mV
1R , 2R DC 0 to 10mV
Service temperature0 to 40ºC
Power voltageAC100V 50/60Hz 10VA
Gauge headP-9 ф15
MassMain body1400g
Gauge head180g
Exterior dimension drawing[PDF]  [DXF]
Panel cut dimension
Standard attachmentGauge head:P-9(ф15)Power cord:2mMeasuring cord:2m
OptionGauge headP-9(NW16)
Measuring cord5 · 10 · 20m

PT-3P(M)

Features and application
 Easy readout due to adoption of 1-range large-sized analog meter 
 Low-price
 Equipped with recorder output
 Meter-relay attached type available
 Meter-relay attached type available
 For research and development

Product specification

Measuring range1.3 X 102 to 1.3 X 10-1Pa
Range1-range
Measurementconstant voltage measuring circuit
REC OUT output
1-range DC 0 to 10mV
Set output (M)2-points AC100V 1A
Service temperature0 to 40ºC
Power voltageAC100V 50/60Hz 4VA
Gauge headP-3 ф15
Mass
( ): with meter-relay
Main body1200g(1900g)
Gauge head100g
Exterior dimension drawing[PDF] [DXF]
Panel cut dimension
Gauge headGauge head:P-3(ф15)Power cord:2mMeasuring cord:2m
OptionGauge headP-3(NW16)
Gauge head cord5 · 10 · 20m

PT-4P

Features and application
 Small-sized analog meter adopted 
 Low-price
 Recorder output attached
 Compact and light-weight
 For pressure monitoring
 For research and development

Product specification

Measuring range1.3 X 102 to 1.3 X 10-1Pa
range1-range
Measurementconstant voltage measuring circuit
REC OUT outputDC 0 to 10mV
Service temperature0 to 40ºC
Power voltageAC100V 50/60Hz 2VA
Gauge headP-3 ф15
MassMain body700g
Gauge head100g
Exterior dimension drawing[PDF] [DXF]
Panel cut dimension
Standard attachmentGauge head:P-3(ф15)Power cord:2m (Connected to the main body directly)Measuring cord:4m (Connected to the main body directly)


相关标签:   大亚DIAVAC,PiranigaugeTransducerTRP-10/TRP-10SP价格,PiranigaugeTransducerTRP-10/TRP-10SP批发

最近浏览:

在线客服
分享 一键分享